搜索
Search

To be your proud—JIELITE TOOLS

简体 English
返回

NEWS CENTER

Check category

Carbide Introduction

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2021-11-25 08:41
  • Views:

(Summary description)The cemented carbide is a main component with a high hardness refractory metal carbide (WC, TiC) micron powder, with cobalt (CO) or nickel (Ni), molybdenum (MO) is an adhesive, a powder metallurgy product which is sintered in a vacuum or hydrogen. Ivb, Vb, Vib metal carbide, nitride, boride, etc. The structural, characteristics, and applications of the rigid gold are described below with carbides. In a metal-type carbide formed of IVA, Va, VIA metal and carbon, due to small radius of carbon atoms, can be filled in the voids of the metal character and retain the metallic lattice form, forming a lifting solvent. Under suitable conditions, such solid solutions can continue to dissolve its composition elements until they are saturated. Thus, their composition can be varied within a certain range (for example, the composition of titanium titanide is changed between TiC0.5 to TiC), and the chemical formula does not meet the compliance rules. When the dissolved carbon content exceeds a certain limit (for example, TiC = 1), the lattice type will change, turn the original metal lattice to another form of metal lattice, at this time A renovated solvent is called a metallic replete. Metal type carbide, especially IVB, Vb, and Vib metal carbide has a melting point of 3273k, wherein the carbide, tantalum carbide is 4160k and 4150K, respectively, and is a high melting point in the currently known substance. Most carbides have a large hardness, their microscopic hardness is greater than 1800kg? Mm2 (micro-hardness is one of the hardness representations, mostly used in cemented carbide and hard compounds, micro hardness 1800kg? Mm2 equivalent to Mo's Diamond a hardness 9). Many carbides are not easy to decompose at high temperatures, and antioxidant capacity is strong than its components. Titanium carbide is well thermally stabilized in all carbides, is a very important metal carbide. However, in an oxidative atmosphere, all carbides are easily oxidized at high temperatures, which can be said that this is a large weakness of the carbide. In addition to carbon atoms, nitrogen atoms, boron atoms can also enter the gap of the metal lattice, forming a reinforcing solution. They are similar to the nature of the complex carbide, which can conduct electricity, heat transfer, high melting point, high hardness, and the brittleness is also large. The substrate of the cemented carbide consists of two parts. Part is hardened; the other part is bonding metal. The hardening phase is a carbide of the transition metal in the periodic table, such as tungsten carbide, titanium carbide, carbon tantalum, and its hardness is high, and the melting point is more than 2000 ° C, and some even over 4000 ° C. Further, the nitride, boride, and silicide of the transition metal also have a similar character, or may act as a hardening phase in a carbide. The presence of a hardening phase determines that the alloy has good hardness and wear resistance. Bond metals are typically ferrous metal, commonly used, cobalt and nickel. When a hard alloy is produced, the selected raw material powder particle size is between 1 to 2 microns, and the purity is high. The raw material is ingredient according to the specified composition, and the alcohol or other medium is added to the wet ball mill, so that they are fully mixed, pulverized, dried, sieved to add a type of molding agent such as wax or glue, and then dry, over The mixture is prepared. The mixture is then granulated, the mixture is heated to approaching the bonding metal melting point (1300 to 1500 ° C), and the hardening phase forms an eutectic alloy with the bonded metal. After cooling, the hardening phase is distributed in the grid composed of bonded metal, closely together, forming a firm whole. The hardness of the hard alloy depends on the hardening phase content and the grain particle size, that is, the higher the hardening phase content, the finer the grains, the greater the hardness. The toughness of the cemented carbide is determined by bonding metal, the higher the bond metal content, the greater the strength of the bending. In 1923, Germany's Schletel added 10% to 20% of the cobalt to binder, invented the new alloy degree of tungsten carbide and cobalt, which is the world's artificial production. First carbide. When cutting steel with this alloy, the blade will be worn quickly, and even the cutting cracked. In 1929, Schwarzkov added a quantity of tungsten carbide and tetanned carbide in the original ingredient, and improved the performance of the tool cutting steel. This is another achievement in the history of hard alloy development. The cemented carbide has a series of excellent performance, heat resistance, strength and toughness, heat resistance, corrosion resistance, etc., especially its high hardness and wear resistance, even at temperatures at 500 ° C. There is still a high hardness at 1000 ° C. Cemented carbide is widely used as tool materials such as car kni

Carbide Introduction

(Summary description)The cemented carbide is a main component with a high hardness refractory metal carbide (WC, TiC) micron powder, with cobalt (CO) or nickel (Ni), molybdenum

(MO) is an adhesive, a powder metallurgy product which is sintered in a vacuum or hydrogen.



Ivb, Vb, Vib metal carbide, nitride, boride, etc. The structural, characteristics, and applications of the rigid gold are described below with carbides.



In a metal-type carbide formed of IVA, Va, VIA metal and carbon, due to small radius of carbon atoms, can be filled in the voids of the metal character and retain the metallic lattice form, forming a lifting solvent. Under suitable conditions, such solid solutions can continue to dissolve its composition elements until they are saturated. Thus, their composition can be varied within a certain range (for example, the composition of titanium titanide is changed between TiC0.5 to TiC), and the chemical formula does not meet the compliance rules. When the dissolved carbon content exceeds a certain limit (for example, TiC = 1), the lattice type will change, turn the original metal lattice to another form of metal lattice, at this time A renovated solvent is called a metallic replete.



Metal type carbide, especially IVB, Vb, and Vib metal carbide has a melting point of 3273k, wherein the carbide, tantalum carbide is 4160k and 4150K, respectively, and is a high melting point in the currently known substance. Most carbides have a large hardness, their microscopic hardness is greater than 1800kg? Mm2 (micro-hardness is one of the hardness representations, mostly used in cemented carbide and hard compounds, micro hardness 1800kg? Mm2 equivalent to Mo's Diamond a hardness 9). Many carbides are not easy to decompose at high temperatures, and antioxidant capacity is strong than its components. Titanium carbide is well thermally stabilized in all carbides, is a very important metal carbide. However, in an oxidative atmosphere, all carbides are easily oxidized at high temperatures, which can be said that this is a large weakness of the carbide.



In addition to carbon atoms, nitrogen atoms, boron atoms can also enter the gap of the metal lattice, forming a reinforcing solution. They are similar to the nature of the complex carbide, which can conduct electricity, heat transfer, high melting point, high hardness, and the brittleness is also large.



The substrate of the cemented carbide consists of two parts.



Part is hardened; the other part is bonding metal.



The hardening phase is a carbide of the transition metal in the periodic table, such as tungsten carbide, titanium carbide, carbon tantalum, and its hardness is high, and the melting point is more than 2000 ° C, and some even over 4000 ° C. Further, the nitride, boride, and silicide of the transition metal also have a similar character, or may act as a hardening phase in a carbide. The presence of a hardening phase determines that the alloy has good hardness and wear resistance.

Bond metals are typically ferrous metal, commonly used, cobalt and nickel.

When a hard alloy is produced, the selected raw material powder particle size is between 1 to 2 microns, and the purity is high. The raw material is ingredient according to the specified composition, and the alcohol or other medium is added to the wet ball mill, so that they are fully mixed, pulverized, dried, sieved to add a type of molding agent such as wax or glue, and then dry, over The mixture is prepared. The mixture is then granulated, the mixture is heated to approaching the bonding metal melting point (1300 to 1500 ° C), and the hardening phase forms an eutectic alloy with the bonded metal. After cooling, the hardening phase is distributed in the grid composed of bonded metal, closely together, forming a firm whole. The hardness of the hard alloy depends on the hardening phase content and the grain particle size, that is, the higher the hardening phase content, the finer the grains, the greater the hardness. The toughness of the cemented carbide is determined by bonding metal, the higher the bond metal content, the greater the strength of the bending.



In 1923, Germany's Schletel added 10% to 20% of the cobalt to binder, invented the new alloy degree of tungsten carbide and cobalt, which is the world's artificial production. First carbide. When cutting steel with this alloy, the blade will be worn quickly, and even the cutting cracked. In 1929, Schwarzkov added a quantity of tungsten carbide and tetanned carbide in the original ingredient, and improved the performance of the tool cutting steel. This is another achievement in the history of hard alloy development.



The cemented carbide has a series of excellent performance, heat resistance, strength and toughness, heat resistance, corrosion resistance, etc., especially its high hardness and wear resistance, even at temperatures at 500 ° C. There is still a high hardness at 1000 ° C. Cemented carbide is widely used as tool materials such as car kni

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2021-11-25 08:41
  • Views:

The cemented carbide is a main component with a high hardness refractory metal carbide (WC, TiC) micron powder, with cobalt (CO) or nickel (Ni), molybdenum

(MO) is an adhesive, a powder metallurgy product which is sintered in a vacuum or hydrogen.

Ivb, Vb, Vib metal carbide, nitride, boride, etc. The structural, characteristics, and applications of the rigid gold are described below with carbides.

In a metal-type carbide formed of IVA, Va, VIA metal and carbon, due to small radius of carbon atoms, can be filled in the voids of the metal character and retain the metallic lattice form, forming a lifting solvent. Under suitable conditions, such solid solutions can continue to dissolve its composition elements until they are saturated. Thus, their composition can be varied within a certain range (for example, the composition of titanium titanide is changed between TiC0.5 to TiC), and the chemical formula does not meet the compliance rules. When the dissolved carbon content exceeds a certain limit (for example, TiC = 1), the lattice type will change, turn the original metal lattice to another form of metal lattice, at this time A renovated solvent is called a metallic replete.

Metal type carbide, especially IVB, Vb, and Vib metal carbide has a melting point of 3273k, wherein the carbide, tantalum carbide is 4160k and 4150K, respectively, and is a high melting point in the currently known substance. Most carbides have a large hardness, their microscopic hardness is greater than 1800kg? Mm2 (micro-hardness is one of the hardness representations, mostly used in cemented carbide and hard compounds, micro hardness 1800kg? Mm2 equivalent to Mo's Diamond a hardness 9). Many carbides are not easy to decompose at high temperatures, and antioxidant capacity is strong than its components. Titanium carbide is well thermally stabilized in all carbides, is a very important metal carbide. However, in an oxidative atmosphere, all carbides are easily oxidized at high temperatures, which can be said that this is a large weakness of the carbide.

In addition to carbon atoms, nitrogen atoms, boron atoms can also enter the gap of the metal lattice, forming a reinforcing solution. They are similar to the nature of the complex carbide, which can conduct electricity, heat transfer, high melting point, high hardness, and the brittleness is also large.

The substrate of the cemented carbide consists of two parts.

Part is hardened; the other part is bonding metal.

The hardening phase is a carbide of the transition metal in the periodic table, such as tungsten carbide, titanium carbide, carbon tantalum, and its hardness is high, and the melting point is more than 2000 ° C, and some even over 4000 ° C. Further, the nitride, boride, and silicide of the transition metal also have a similar character, or may act as a hardening phase in a carbide. The presence of a hardening phase determines that the alloy has good hardness and wear resistance.

Bond metals are typically ferrous metal, commonly used, cobalt and nickel.

When a hard alloy is produced, the selected raw material powder particle size is between 1 to 2 microns, and the purity is high. The raw material is ingredient according to the specified composition, and the alcohol or other medium is added to the wet ball mill, so that they are fully mixed, pulverized, dried, sieved to add a type of molding agent such as wax or glue, and then dry, over The mixture is prepared. The mixture is then granulated, the mixture is heated to approaching the bonding metal melting point (1300 to 1500 ° C), and the hardening phase forms an eutectic alloy with the bonded metal. After cooling, the hardening phase is distributed in the grid composed of bonded metal, closely together, forming a firm whole. The hardness of the hard alloy depends on the hardening phase content and the grain particle size, that is, the higher the hardening phase content, the finer the grains, the greater the hardness. The toughness of the cemented carbide is determined by bonding metal, the higher the bond metal content, the greater the strength of the bending.

In 1923, Germany's Schletel added 10% to 20% of the cobalt to binder, invented the new alloy degree of tungsten carbide and cobalt, which is the world's artificial production. First carbide. When cutting steel with this alloy, the blade will be worn quickly, and even the cutting cracked. In 1929, Schwarzkov added a quantity of tungsten carbide and tetanned carbide in the original ingredient, and improved the performance of the tool cutting steel. This is another achievement in the history of hard alloy development.

The cemented carbide has a series of excellent performance, heat resistance, strength and toughness, heat resistance, corrosion resistance, etc., especially its high hardness and wear resistance, even at temperatures at 500 ° C. There is still a high hardness at 1000 ° C. Cemented carbide is widely used as tool materials such as car knives, milling cutters, planer, drill, boring, etc., for cutting cast iron, non-ferrous metals, plastic, chemical fiber, graphite, glass, stone and ordinary steel, can also be cut Material resistant steel, stainless steel, high manganese steel, tool steel and other materials. Now the new type of cemented carbide tool cutting speed is equal to hundreds of times of carbon steel.

Cemented carbide can also be used to make rock drill tools, mining tools, drilling tools, measuring instruments, wear-resistant parts, metal abrasives, cylinder liners, precision bearings, nozzles, etc.

In the past two decades, coating hard alloys have also come out. In 1969, Sweden has successfully developed tonite Xu layer tool. The base of the tool is a tungsten cobalt cemented carbide or a tungsten cobalt carbonide, and the thickness of the titanium carbide coating is only a few microns, but compared to the alloy tool of the same number. The service life is extended by three times, and the cutting speed is increased by 25% to 50%. The fourth-generation coating tool has appeared in the 1970s, which can be used to cut the material that is difficult to process.

How is the hard alloy sintered?

The cemented carbide is a metal material made of such or more difficult metal carbides and adhesive metals, with powder metallurgy.

Keyword:

Related News

Delivery Points of Straight Handles
Direct shank is required to ensure that the entire axis is working properly, and the transcissile pulley is easy to slide out of the transmission shaft. When installing: pay attention to: 1, install with drill collet This mounting method is suitable for installing straight shank drills. Since it is inserted into the lathe tail sleeve with a tapered handle of the drill, after the drill bit is inserted into the three claws of the drill collet, it is installed with a key clamping, so it is generally only mounting the straight handle of φ13mm or less. drill. 2, install the drill package When the tapered handle number of the straight shank is consistent with the tapered hole number of the lathe tail, the tapered shank can be inserted into the lathe tail sleeve; however, if the number of the two is different, the drill set transition is available. For example, the drill tapered handle is 2, and the lathe tail sleeve cone is 4th, then it is necessary to use two drill sites outside 3 and inner 3, first put two drill sockets on the drill bit, then Then put it into the tail of the lathe. When the drill is removed from the drill sleeve, the dedicated slide is generally inserted from the waist hole of the drill sleeve. After a gently knocking of the oblique iron, the drill will be squeezed out. 3. Install with V-shaped groove iron This method is to mount the drill bit on the tool holder without using the lathe tail. As long as the two V-shaped grooves are applied to the drill bit (straight handle drill bit) on the tool holder, automatic feed can be applied. 4, install with special tools The straight shank can be inserted into the dedicated tool tapered hole 1, and the special tool 2 is partially clamped in the tool holder. After adjusting, you can use automatic feed to bore. Generally, the tapered hole of the special tool is generally formed, and if the drill bit does not match the drill bit and the tapered bore number; if it is a straight handle drill bit, the drill tip is applied to the tapered hole of the special tool. Inside, install it with a drill collet.
查看详情 白箭头 黑箭头
Non-standard Knives Are Customized, First Need To Pay Attention
In the process of machining, some difficulties in which it is difficult to use standard tools, and therefore, the production of non-standard cutters is important to mechanical cutting. Because metal cutting uses non-standard cutters more common in milling, the production of non-standard cutters in milling processing is slightly introduced. Since the fabrication of standard tools is for the cutting of a wide range of common metal parts or non-metal parts, it is very easy to stick to the hardness of the workpiece, or the workpiece is stainless steel, etc., and some workpiece surface geometry The shape is very complicated, or the surface has a high roughness requirement, etc., the standard tool cannot meet the needs of processing. Titanium machinery is a main product of rotation, screw, axial machining, CNC lathe processing, knife holder rod, and chuck pick-up, so during processing, the geometry of the tool, the geometry of the knife, geometry Angle, etc., for targeted design, can be divided into two major classes that do not need to be specifically customized and needed. It is mainly to solve two problems, such as dimensional problems and surface roughness problems. If it is a size problem, you can choose a standard tool similar to the size of the desired size, can be solved by reforming, but also pay attention to two points: () The size is not too large, generally do not exceed 2mm, because the dimension is too large, causing a change in the groove shape of the tool to directly affect the cost of costumes and geometries. (2) If it is a vertical mill with a blade, it can be changed on a normal machine, the cost is low. If it is a keyway milling cutter without a blade, it cannot be carried out on ordinary machines, and it is necessary to be in a special five-axis. The linkage of the linkage machine is higher. If it is a surface roughness problem, it can be realized by a change in the geometric angle of the blade portion. If the maximum number of the rear angle will significantly improve the surface roughness of the workpiece. However, if the machine is not enough, it may be sharply improved surface roughness, which is very complicated in this regard, and it is necessary to conclude after processing site analysis.
查看详情 白箭头 黑箭头
What is The Application Characteristics
During the actual application, we understand that the cemented carbide drill bit is a complete hard alloy bar. It has a wide range of versatility, high strength, high hardness performance, fast cutting speed, abrasion resistance, and good red hardness, suitable for processing parts of various materials. The cemented carbide drill bit can be divided into internal cooling and outer type. I. Features and Use () The rigidity is good, the strength is high, and it is easy to obtain higher drilling accuracy. (2) It can be suitable for drilling of more complex materials, which can choose higher cutting speed. (3) Effective reduction of the strapping and has good wear resistance. (4) Multi-layer geometric cutting edge, improved drashing resistance, maintain less cutting resistance. (5) Except for commonly used right-angle handle, there are a variety of handle types, suitable for a variety of drills, drilling machines. (6) Compared to the transpositional blade drill bit, the overall hard alloy drill bit can be worn by 7 to 0 times. Second. Hard alloy drill bit selection points: Before the processing parts, the material is different from the material of the part (P, M, K, S, N, etc.); second, according to the size and depth of the drilling hole, Select different drills and structures, such as two blade, three blade, X, etc .;, different cutting parameters are selected according to equipment and product precision.
查看详情 白箭头 黑箭头
上一页
1
2
...
4

0576-81758818

在线时间:09:30-05:30

联系人

林小姐 18858647878

jielite

Address: NO.26 Fengyu East Road,Yuhuan economic development zone,Yuhuan,Zhejiang China

jielite

Tel:0576-81758818

jielite

E-mail:mail@jielitetools.net

 

这是描述信息
FIND US
© 2021 Yuhuan Jielite Tools Co., Ltd. 浙ICP备2021035046号 Powered by:300.cn